Not every concrete project needs a full truck. A small patio, equipment pad, sidewalk repair, driveway extension, footing, or utility patch may require only a few cubic yards. That is where small-load concrete delivery can save a crew from mixing dozens—or even hundreds—of bags by hand.
The phrase “small load” does not have one universal yardage cutoff. A traditional ready-mix producer may use it for any order below its standard truck minimum and add a short-load charge. A volumetric concrete truck works differently: the ingredients stay separate until the truck reaches the job, and the concrete is mixed on site as it is placed. This makes volumetric delivery especially useful when the exact quantity is uncertain or the job needs less than a conventional full load.
For customers in New Braunfels, San Antonio, and nearby Central Texas communities, the best option depends on more than yardage. Access, placement speed, mix requirements, labor, weather, and the total delivered price all matter.
Quick answer
Small-load delivery can suit patios, pads, repairs, and other smaller placements where mixing bags would require substantial labor. Metered volumetric delivery can mix fresh concrete at the site and measure what is placed, but the customer still needs an estimate, approved mixture requirements, access plan, and ready crew.
Measure
Calculate every slab, pad, footing, or repair area separately.
Specify
Confirm the required strength and other mixture details from the project documents.
Plan access
Choose chute, wheelbarrow, bucket, or pump placement before delivery day.
Schedule
Share the location, volume, access notes, placement method, and preferred timing.
What Counts as a Small Concrete Load?
In everyday use, a small load is simply an order that is well below a mixer truck’s full capacity. The exact definition varies by supplier. Some producers have a minimum order, while others will deliver a smaller quantity with delivery, minimum-load, or short-load charges.
That is why comparing only the advertised price per cubic yard can be misleading. Before ordering, ask for the total delivered price and confirm what it includes. Depending on the supplier and job, the quote may account for:
- The concrete volume and mix design
- Delivery distance
- A minimum or short-load charge
- Waiting or unloading time
- Saturday, after-hours, or rush scheduling
- Concrete pumping or additional placement equipment
- Taxes or environmental fees
Express Metered Concrete uses volumetric trucks that mix fresh concrete at the job site. The calibrated meter tracks the amount placed, so customers can receive the quantity the project actually uses rather than guessing at a full-truck load. Minimum charges may still apply, so the right comparison is always the complete quote for your specific job.
Projects That Commonly Need Small-Load Delivery
Small-load delivery can make sense for residential, commercial, and municipal work, including:
- Shed, generator, HVAC, dumpster, or equipment pads
- Sidewalk and walkway sections
- Small patios and patio extensions
- Driveway aprons or driveway repairs
- Fence, gate, sign, or structural footings
- Curbs, gutters, and ADA ramp repairs
- Pool-deck sections
- Utility cuts, manholes, and trench restoration
- Retaining-wall footings
- Slab repairs and small additions
Project type alone does not determine the correct concrete. The required strength, slump, aggregate, reinforcement, exposure conditions, and any admixtures should come from the project plans, engineer, contractor, or applicable specification.
Small-Load Delivery Versus Mixing Concrete Bags
Bagged concrete can be practical for a post hole, single step, or very small repair. As volume increases, however, the labor and consistency tradeoffs change quickly.
One cubic yard contains 27 cubic feet. An 80-pound bag commonly yields about 0.6 cubic foot, although the exact yield varies by product. At that approximate yield, one cubic yard takes about 45 bags. Always use the yield printed on the specific bag before calculating.
Mixing that amount requires moving thousands of pounds of material, measuring water repeatedly, cleaning equipment, and placing each batch before the previous batch progresses too far. A delivered load may be the better choice when:
- The pour needs to move continuously
- The crew cannot keep up with hand mixing
- Consistent batches are important
- The site needs more than a very small repair quantity
- Labor time is more valuable than the apparent savings on bags
- Avoiding multiple cold joints is a priority
Bagged concrete may still be the practical choice when truck access is impossible, the volume is only a fraction of a yard, or the job can be completed comfortably in small batches.
Why Volumetric Concrete Works Well for Smaller Pours
A volumetric mixer carries cement, sand, aggregate, water, and admixtures in separate compartments. The materials are proportioned and mixed at the job rather than being fully batched before the truck leaves a plant.
For a small or difficult-to-estimate pour, that approach offers several advantages:
Concrete is mixed fresh on site
The concrete is produced as it is discharged, so it has not spent the delivery trip hydrating in a rotating drum. This is especially valuable during hot Central Texas weather, when planning, placement, finishing, and moisture protection need extra attention.
The placed volume is metered
If the forms take slightly more or less than the estimate, the calibrated meter records the actual amount placed, subject to the supplier’s minimum charges and truck capacity.
Waste can be reduced
Accurate measuring still matters, but on-site metering reduces the need to intentionally over-order a large amount simply to avoid running short.
The mix may be adjusted when the job requires it
Some projects need different concrete designs for separate placements. A volumetric truck may be able to adjust the mix on site when the requested materials, specifications, and truck setup allow it. Confirm every mix requirement with dispatch before scheduling.
How to Plan a Small Concrete Delivery
1. Calculate the volume
Measure each form separately. For a rectangular area, multiply length by width by thickness in feet, then divide the cubic-foot total by 27 to convert it to cubic yards.
For example, a 12-foot-by-12-foot slab that is 4 inches thick contains about 1.78 cubic yards before any allowance for subgrade variation, spillage, or form irregularities.
Use the Express Metered Concrete calculator to total multiple rectangles, circles, or triangles. The guide on calculating concrete for a slab explains the measurement process in more detail.
2. Confirm the concrete specification
Do not choose structural concrete solely from a blog post or a rule of thumb. Tell dispatch what you are building and provide the engineer’s or contractor’s requirements when applicable, including strength, slump, aggregate size, reinforcement, exposure conditions, and any approved admixtures.
3. Check truck and placement access
Before delivery day, consider:
- Gate and driveway width
- Overhead wires, trees, and rooflines
- Soft soil, steep grades, curbs, and septic areas
- The distance from the truck to the forms
- Traffic control and room for the truck to enter and leave
- Whether wheelbarrows, buggies, a chute, or a line pump will be needed
If the truck cannot safely reach the placement area, ask whether concrete pumping is appropriate.
4. Have the site and crew ready
Forms, reinforcement, tools, labor, washout planning, and curing materials should be ready before the truck arrives. Fresh on-site mixing gives the crew flexibility, but it does not replace a placement and finishing plan.
5. Discuss Central Texas weather
Heat, low humidity, wind, direct sun, and rain can all affect placement and finishing. Hot weather can accelerate slump loss and moisture evaporation, while rain and saturated ground can create finishing and truck-access problems. Review the forecast and make a weather plan with the contractor and concrete supplier instead of improvising after delivery begins.
Questions to Ask Before Scheduling
Give dispatch enough information to quote and plan the delivery accurately:
- What is the project and job-site address?
- How many cubic yards does the estimate show?
- What mix or project specification is required?
- When does the crew want to begin placing?
- Can the truck reach the forms safely?
- How will the concrete move from the truck to the placement?
- Is a line pump or other equipment needed?
- Are there minimum, delivery, waiting-time, or after-hours charges?
- Who will be on site to receive the truck and direct placement?
Small-Load Concrete Delivery Around New Braunfels and San Antonio
Express Metered Concrete serves residential and commercial projects from its New Braunfels and Von Ormy yards across the I-35 corridor and surrounding communities. Volumetric delivery is a practical option for smaller pours because the concrete is mixed fresh at the job and metered as it is placed.
Start with the concrete calculator, then request a job-specific quote. Share the location, estimated yardage, project type, access details, and required mix so dispatch can confirm availability and the complete delivered price.
Request a concrete delivery quote or call (830) 627-9637.
Frequently Asked Questions
What is short-load concrete?
Short-load concrete is an order below a supplier’s standard or preferred truck quantity. The cutoff and any related charges vary by producer, so ask for the total delivered price instead of comparing only the price per yard.
Can I have one cubic yard of concrete delivered?
Availability and minimum charges depend on the supplier, location, mix, schedule, and equipment. Volumetric delivery can suit small quantities, but dispatch must confirm whether the requested volume and job are serviceable.
How many 80-pound bags equal one cubic yard?
At an approximate yield of 0.6 cubic foot per 80-pound bag, one cubic yard requires about 45 bags. Product yields vary, so calculate with the yield printed on the bag you plan to use.
Is small-load delivery cheaper than mixing bags?
It depends on volume, delivery costs, access, crew size, and the value of labor time. Bagged concrete may make sense for a very small repair. Delivered concrete often becomes more practical when hand mixing would slow placement or require dozens of bags.
Do I need a concrete pump for a small pour?
Not always. A pump may help when the truck cannot safely reach the forms or when wheelbarrow or buggy placement would be too slow. Share the access distance, elevation changes, and placement location when requesting the quote.
Internal Linking Plan
- Link “volumetric delivery” to
https://expressmc.com/services/metered-volumetric-concrete/ - Link “concrete calculator” to
https://expressmc.com/concrete-calculator/ - Link the slab-measurement reference to
https://expressmc.com/how-much-concrete-do-i-need-for-a-slab/ - Link “concrete pumping” to
https://expressmc.com/services/concrete-pumping/ - Link the local-service paragraph naturally to the New Braunfels and San Antonio location pages
- Link the final CTA to
https://expressmc.com/get-a-free-quote/
Schema Notes
- Use
Articleschema with Express Metered Concrete as publisher. - Add
FAQPageschema only for the five visible FAQ questions and answers above. - Do not add unverifiable price, minimum-order, same-day-delivery, or availability claims.
Editorial Fact-Check Sources
- Express Metered Concrete homepage and volumetric service page for its metered, fresh-on-site process and service area.
- American Concrete Institute preview, Concrete Craftsman Series: Slabs-on-Ground, for the information a producer needs when an order is placed: https://www.concrete.org/Portals/0/Files/PDF/Previews/CCS-1%2810%29_web_preview.pdf
- Texas Department of Transportation guidance on hot-weather concreting and delivery timing: https://www.txdot.gov/manuals/mnt/pdm/rigid_pavement_construction/delivery_conc-i1007342/concrete_delivery_time-i1015020.html
- Bag yield must be checked against the manufacturer’s label before publication if a specific product is named.
References and further reading
These primary and industry sources support the planning concepts in this guide. Project plans, specifications, permits, and the responsible professionals still control the work.